/COM,ANSYS RELEASE 8.1 UP20040329 18:19:45 09/15/2004 *** ERROR *** CP= 15.438 TIME= 18:22:44 The specified volumes cannot be swept because the side line division specifications are too strict. Change EXTOPT,ESIZE,NDIV or remove LESIZEs off lines and try the VSWE command again. *** WARNING *** CP= 27.016 TIME= 18:33:01 Boolean operation involves meshed Volume 1. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 27.328 TIME= 18:33:01 Boolean operation involves meshed Volume 2. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 27.641 TIME= 18:33:02 Boolean operation involves meshed Volume 3. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 27.984 TIME= 18:33:02 Boolean operation involves meshed Volume 4. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 28.344 TIME= 18:33:03 Boolean operation involves meshed Volume 5. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** SUPPRESSED MESSAGE CP= 30.984 TIME= 18:33:05 Volume 1 is meshed and cannot be deleted. *** WARNING *** SUPPRESSED MESSAGE CP= 30.984 TIME= 18:33:05 Volume 2 is meshed and cannot be deleted. *** WARNING *** SUPPRESSED MESSAGE CP= 30.984 TIME= 18:33:06 Volume 3 is meshed and cannot be deleted. *** WARNING *** SUPPRESSED MESSAGE CP= 30.984 TIME= 18:33:06 Volume 4 is meshed and cannot be deleted. *** WARNING *** SUPPRESSED MESSAGE CP= 30.984 TIME= 18:33:06 Volume 5 is meshed and cannot be deleted. *** WARNING *** CP= 31.891 TIME= 18:33:33 Boolean operation involves meshed Area 3. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 32.016 TIME= 18:33:33 Boolean operation involves meshed Area 12. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 32.188 TIME= 18:33:33 Boolean operation involves meshed Area 16. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 32.375 TIME= 18:33:34 Boolean operation involves meshed Area 20. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 32.578 TIME= 18:33:34 Boolean operation involves meshed Area 24. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 34.047 TIME= 18:33:48 Boolean operation involves meshed Area 1. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 34.156 TIME= 18:33:48 Boolean operation involves meshed Area 2. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 34.438 TIME= 18:33:48 Boolean operation involves meshed Area 4. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 34.641 TIME= 18:33:49 Boolean operation involves meshed Area 5. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. *** WARNING *** CP= 34.859 TIME= 18:33:49 Boolean operation involves meshed Area 6. This operation may create new entities without elements and could contaminate the database. The recommended approach is to perform Boolean operations only on unmeshed entities. /COM,ANSYS RELEASE 8.1 UP20040329 18:36:24 09/15/2004 *** WARNING *** CP= 62.531 TIME= 18:46:47 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** ERROR *** CP= 62.562 TIME= 18:46:48 No Space Temperature or Space Node specified for open Enclosure 1. *** ERROR *** CP= 63.031 TIME= 18:46:53 No Space Temperature or Space Node specified for open Enclosure 2. *** WARNING *** CP= 73.891 TIME= 18:47:38 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** ERROR *** CP= 73.922 TIME= 18:47:38 No Space Temperature or Space Node specified for open Enclosure 1. *** ERROR *** CP= 74.172 TIME= 18:47:42 No Space Temperature or Space Node specified for open Enclosure 2. *** WARNING *** CP= 89.375 TIME= 18:50:32 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 90.453 TIME= 18:50:34 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 08:12:57 09/16/2004 *** WARNING *** CP= 26.625 TIME= 08:19:22 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 27.828 TIME= 08:19:24 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency.