/COM,ANSYS RELEASE 8.1 UP20040329 11:27:05 06/15/2004 *** WARNING *** CP= 28.188 TIME= 11:34:03 The requested ALL table data does not exist. The TBLIS command is ignored. /COM,ANSYS RELEASE 8.1 UP20040329 11:51:46 08/23/2004 *** WARNING *** CP= 29.969 TIME= 12:15:29 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** ERROR *** CP= 30.078 TIME= 12:15:29 Element 1 requires material properties and references material number 2 for which no properties are defined. Checking terminates. *** ERROR *** CP= 30.609 TIME= 12:15:44 The step data was checked and there were errors found. Please check output or errors file ( C:\OCIW\FourStar\FEA\problem1\problem1.err ) for messages. *** WARNING *** CP= 30.812 TIME= 12:15:45 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. *** WARNING *** CP= 74.250 TIME= 14:13:04 No path data active. The PDEF command is ignored. *** WARNING *** CP= 75.750 TIME= 14:13:31 No path data active. The PDEF command is ignored. /COM,ANSYS RELEASE 8.1 UP20040329 15:30:03 08/23/2004 /COM,ANSYS RELEASE 8.1 UP20040329 16:20:38 08/23/2004 *** WARNING *** CP= 39.719 TIME= 16:27:56 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 39.906 TIME= 16:27:56 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 16:31:42 08/23/2004 *** WARNING *** CP= 14.609 TIME= 16:32:44 MAT1 is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored. *** WARNING *** CP= 27.734 TIME= 16:35:58 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** ERROR *** CP= 27.734 TIME= 16:35:58 No Space Temperature or Space Node specified for open Enclosure 1. *** ERROR *** CP= 27.938 TIME= 16:36:01 No Space Temperature or Space Node specified for open Enclosure 2. *** WARNING *** CP= 31.125 TIME= 16:36:44 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 31.266 TIME= 16:36:44 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 16:37:56 08/23/2004 *** WARNING *** CP= 30.703 TIME= 16:41:59 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 30.859 TIME= 16:41:59 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 16:43:08 08/23/2004 /COM,ANSYS RELEASE 8.1 UP20040329 16:44:12 08/23/2004 *** WARNING *** CP= 12.109 TIME= 16:45:06 MAT is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored. *** WARNING *** CP= 12.656 TIME= 16:45:14 MAT is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored. *** WARNING *** CP= 30.453 TIME= 16:48:25 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 30.594 TIME= 16:48:25 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 17:11:31 08/23/2004 *** WARNING *** CP= 12.344 TIME= 17:13:10 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 12.516 TIME= 17:13:10 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 17:16:58 08/23/2004 *** WARNING *** CP= 20.453 TIME= 17:19:47 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 20.609 TIME= 17:19:47 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency. /COM,ANSYS RELEASE 8.1 UP20040329 17:29:32 08/23/2004 *** WARNING *** CP= 11.656 TIME= 17:30:28 MAT is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored. *** WARNING *** CP= 23.219 TIME= 17:37:39 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** ERROR *** CP= 32.703 TIME= 17:39:33 Improperly connected line set for LCCA command. *** WARNING *** CP= 53.281 TIME= 17:46:18 Specify offset temperature for radiation problem using TOFFST command - For model data in degrees Fahrenheit or Celsius. *** WARNING *** CP= 53.922 TIME= 17:46:19 The program chosen initial timestep/load-factor is arbitrary. It is necessary for the user to supply a suitable initial timestep/load-factor through the NSUB or DELTIM command for convergence and overall efficiency.